M283268 四、創作說明（1) 【新型所屬之技術領域】 本創作係關於一種太陽能警示燈，尤指藉由太陽能板 的設置，白天可以直接以太陽能供電，而夜間則可藉由太 陽能充電電池來提供太陽能警示燈所需要的電力，且具有 環保及省電功效之警示燈構造。 【先前技術】 在我們阈遭的環境中，每天都有許多的工程在進行著 ，從一般的道路施工到新大樓的建設，工程人員不斷進進 出出的工作，再加上很多工程都在人來人往的都市中，因 '此，工地的安全維濩就非常的重要，以工程人員來說，進 出工地必須戴安全帽，大樓施工必須加掛護網，這些都是 為了避免意外的發生而設置的，但是在夜間，因為視線較 差，若是沒有很明顯的標示或是警示，通常會造成許多的 意外產生，所以一般在這些施工處都會設置有警示燈，目 的是在讓行經該路段或是工地的人，能夠在較長距離時清 楚的看到，以習知的警示燈1來看，主要係在架體1 1上 設有支#架體1 1之複數支架1 2 ，而在架體^ 1的上方 設有燈座1 3 ’ ¥體1 1下方則設有電線1 4 ，在使用時 ，係將警示燈1設置於工地周圍或是施工處上，並將電線 1 4接上電源處i，燈座^ 3裡的燈亮起，藉由燈光達到 警示的效果，仁疋這種^示燈1需要藉由電線來通電，會 增加設置上的不方$❿且電線暴露在外，也容易被來往 的車輛輾壞’纟至^倒過往的行人1是下雨天 有漏電或是故障的危險，再且，警示燈1的體積較、，曰 八’使M283268 IV. Creation Description (1) [Technical Field to which the New Type belongs] This creation is about a solar warning light, especially by the installation of solar panels, which can be directly powered by solar energy during the day, and can be charged by solar batteries at night. A warning light structure that provides the power required by a solar warning light and has environmental protection and power saving effects. [Previous technology] In our threshold environment, many projects are being carried out every day. From general road construction to the construction of new buildings, engineers constantly move in and out, plus many projects are in humans. In the cities that come and go, therefore, the safety maintenance of the construction site is very important. For the engineers, the safety helmets must be worn when entering and leaving the construction site, and the building must be equipped with a protective net. These are to avoid accidents. It is set, but at night, because the sight is poor, if there are no obvious signs or warnings, it will usually cause many accidents. Therefore, warning lights are generally set up at these construction sites in order to let the road section or The person at the construction site can clearly see it at a long distance. Looking at the conventional warning light 1, it is mainly provided with a plurality of brackets 1 2 on the frame 1 1 and Above the frame body 1 is provided with a lamp holder 1 3 '¥ body 1 1 is provided with a wire 1 4. When in use, the warning light 1 is set around the construction site or at the construction site, and the wire 1 4 is connected Power on i, The lamp in the lamp holder ^ 3 lights up, and the warning effect is achieved by the light. This kind of ^ indicator lamp 1 needs to be powered by electric wires, which will increase the inconvenience of the installation and the wires are exposed, and it is easy to be exchanged. The vehicle was run down, and the pedestrian 1 who was passing backwards was in danger of electricity leakage or failure on a rainy day. Furthermore, the volume of the warning light 1 was smaller than
第5頁 M283268 -四、創作說明（2) 用時，必須以複數的警示燈1將所欲警示之範圍整個圍住 ，而以習知之警示燈1 ，則必須佔用許多的空間，而且， _複數之警示燈1的使用，在電線接線上，就是使用時的一 -大問題，再加上必須消耗極多的電力，在成本以及效率上 ，都是使用者煩惱的問題，雖然有業者研發出可以裝設電 池的警示燈，但是電池的電量消耗大，通常隔天就必重新 充電，這樣不只會增加成本，更會影響環保，所以該如何 在有效提供警示功能之下，又能符合環保及省電之構造， 實為業者必須努力研究的目標。 •【新型内容】 本創作之首一目的，乃在提供一種太陽能警示燈，主 要係在一長方形之機體上端面設有太陽能板，機體内部則 設有傳導電路、無線電接收器以及太陽能充電電池，並在 前側面板上設有複數間隔排列之L E D燈，可利用太陽能Page 5 M283268-IV. Creation instructions (2) In use, the entire range of warnings must be enclosed by a plurality of warning lights 1, and the conventional warning lights 1 must occupy a lot of space, and, _ The use of the plurality of warning lights 1 is a major problem in the wiring of the wires. In addition, it must consume a lot of power. In terms of cost and efficiency, it is a problem for users. A warning light that can be installed with a battery, but the battery consumes a large amount of power, usually it must be recharged the next day. This will not only increase costs, but also affect environmental protection. And the structure of power saving is the goal that the industry must study hard. • [New content] The first purpose of this creation is to provide a solar warning light, which is mainly provided with a solar panel on the upper end face of a rectangular body, and the body is provided with a conductive circuit, a radio receiver and a solar rechargeable battery. And a plurality of spaced LED lights are arranged on the front side panel, which can use solar energy
第6頁 M283268 四、創作說明（3) 端面設有太陽能板2 2 ，而在機體2 1之一側面與前端面 板之轉角處設有啟動開關2 3 ，並在前端面板上設有複數 排列之L E D燈2 4 ，又在機體2 1的後側端面中，於兩 -側設有複數之太陽能電池2 5 ，使用時，係經按壓啟動開 關2 3後，即令太陽能電池2 5輸出電源至L E D燈2 4 ，以使L E D燈2 4發出光，而能藉由燈光之顯示達到警 示之效果。 再請參閱圖四、五，在實施上，亦可在機體2 1另側 面與前端面板之轉角處設有電源開關2 6 ，並在機體2 1 β後側端面中央設一無線電接收器2 7 ，請配合圖六參閱， 使用時係按壓電源開關2 6 ，則機體上之太陽能板2 2可 以直接接收光能，經過穩壓電路之後，將光能轉換成電能 ，而電能一方面可以使太陽能電池2 5充電，一方面會經 由電路讓電流進入無線電接收器2 7中，而無線電接收器 2 7則係用無線電發射器3來控制，該無線電發射器3係 可以遠距離控制，可分為隨身攜帶或是裝設於工地機房等 ，當無線電發射器3啟動時，則電流就會驅動裡面的編碼 電路將訊號發射出去，而在太陽能警示燈2之無線電接收 B器2 7接收到訊號後，會將訊號放大，隨即會觸發解碼電 路，並進入振盪電路中，再使LED燈2 4發出警示光， 而在夜間無法提供光能時，太陽能電池2 5就會釋出電力 亦之 時4 施粘 實鬼 ，魔 1 由 燈藉 示， 。警4 源能粘 電陽鬼 的太魔 須之一 所作設 光創貼 發本面 4 ，端 2六後 燈圖之 D閱1 E參CM L請體 供再機 提在 ’ 可Page 6 M283268 IV. Creation instructions (3) A solar panel 2 2 is provided on the end surface, and a start switch 2 3 is provided at the corner of one side of the body 2 1 and the front panel, and a plurality of rows are arranged on the front panel. LED lights 24, and in the rear end face of the body 21, a plurality of solar cells 2 5 are provided on both sides. When in use, after the start switch 2 3 is pressed, the solar cells 25 output power to the LED. Light 2 4, so that the LED light 2 4 emits light, and the warning effect can be achieved by the display of the light. Please refer to FIGS. 4 and 5 again. In practice, a power switch 2 6 can also be provided at the corner of the other side of the body 2 1 and the front panel, and a radio receiver 2 7 is located at the center of the rear end face of the body 2 1 β. Please refer to Figure 6 for reference. When using the power switch 2 6, the solar panel 2 2 on the body can directly receive light energy. After the voltage stabilization circuit, the light energy is converted into electrical energy. On the one hand, electrical energy can make solar energy. The battery 25 is charged. On the one hand, the current is allowed to enter the radio receiver 27 via a circuit, and the radio receiver 27 is controlled by the radio transmitter 3. The radio transmitter 3 can be controlled from a long distance and can be divided into Carry it with you or install it in the construction room, etc. When the radio transmitter 3 is activated, the current will drive the coding circuit inside to transmit the signal, and after the radio receiver B 7 of the solar warning light 2 receives the signal , It will amplify the signal, then trigger the decoding circuit and enter the oscillating circuit, and then make the LED lamp 2 4 emit warning light, and when the light energy is not available at night, the solar cell 2 5 When the release of the power 4 is also applied to a solid stick ghosts, illustrated by magic, by a lamp. Police 4 One of the beasts that can adhere to the electric sun ghost. One of the beards is made. The light band is posted on the front side. 4 The end of the lamp is shown in D. 1 E. Please refer to the CM L. Please provide for the machine.
第7頁 M283268 -四、創作說明（4) 5又置，可以讓本創作太陽能警示燈2吁以依須求隨意貼設 在任何地方，而來提供一設置之便利性，如圖八所^之範 例，可將本創作之太陽能警示燈2貼設於交通錐5之上， •提升交通錐5更加顯目之警示效果。 警示燈的設置，主要係讓來往的行人、車輛清楚知道 此處之路況，而太陽能的功能，更大大減去電線接設的不 ，，本創作之太陽能警示燈2 ，可提供工地或者是事故現 =一些需要警示的地方，由於不須接設電力，可利用太陽 板2 2在白天直接依靠太陽能來運作及充電，而在夜間 時二則可利用白天所儲存之電力來提供L E D燈2 4發出 警不光，同時也可以利用無線電發射器3 ，讓使用者可以 無線控制方式來驅動太陽能警示燈2 ，不用在機體上按壓 啟動開關2 3 ，即可使太陽能警示燈2開啟、運作，再者 ’於機體後端面上貼設魔鬼粘4，更可以使太陽能警示燈 〇 更方便的貼設在各種需要警示的場所，例如工地施工 時’安全帽上也可以放置貼設，一般攤販在室外販賣時， 也可以經由太陽能警示燈的放置貼設，減少電線的不便， 即可達到吸引目光以及警示的效果，再如一般車禍事故時 瞻也α午因為碰撞而導致車子故障燈號然法開啟’將本創作 之太陽能警示燈貼設於車體上，更砰以讓人能明顯的看到 刖方有事故發生，使車輛減速經過，提供用路人更安全的 行車目的。 士 综上所述，本創作太陽能警示燈，能有效的提高使用 時的便利性，以及提供一省電且環保的生活空間，應已符Page 7 M283268-Fourth, the creation instructions (4) 5 is set again, which can make this creative solar warning light 2 appealing to be placed anywhere as required, to provide the convenience of a setting, as shown in Figure 8 ^ As an example, the solar warning light 2 of this creation can be attached to the traffic cone 5 to enhance the more prominent warning effect of the traffic cone 5. The setting of warning lights is mainly to let the passing pedestrians and vehicles know the road conditions here, and the function of solar energy is greater minus the connection of electric wires. The solar warning light 2 of this creation can provide construction sites or accidents. Now = some places where warning is needed, because there is no need to connect electricity, solar panels 2 2 can be directly operated and recharged by solar energy during the day, and at night 2 can use the power stored during the day to provide LED lights 2 4 Not only the alarm is issued, but also the radio transmitter 3 can be used to allow the user to wirelessly control the solar warning light 2 without pressing the start switch 2 3 on the body to enable the solar warning light 2 to turn on and operate. 'The devil stick 4 is attached to the rear surface of the machine body, which can make the solar warning light more convenient. 0. It can be more conveniently placed in various places that need to be warned. For example, when the construction site is under construction. At the same time, the placement of solar warning lights can also be used to reduce the inconvenience of the electrical wires, which can achieve the effect of attracting attention and warning. For example, when looking at a general car accident, the car ’s fault light is turned on because of a collision. 'The solar warning light of this creation is attached to the car body, and it is more bang so that it can be clearly seen The accident slowed down the vehicle and provided a safer driving purpose for passersby. In summary, the creative solar warning light can effectively improve the convenience of use, and provide a power-saving and environmentally friendly living space.
第8頁 M283268Page 8 M283268
第9頁 M283268 圖式簡單說明 【圖式簡單說明】 圖一係習知警示器之立體圖。 圖二係本創作一較佳實施例之立體圖。 圖三係圖二之後視立體圖。 圖四係本創作另一較佳實施例之立體圖。 圖五係圖四之後視立體圖。 圖六係圖四實施例之線路方塊圖。 圖七係本創作又一較佳實施例之立體圖。 圖八係圖七之使用示意圖。 說 !# 符 件 元 要 主 燈 示 警 陽 太 2 關 開 體座體動 架燈機啟 IX 00 1± 00 IX 1± 燈 示 警 板燈 能D 架線陽E 支電太L 2 4 2 4 r-H T-H 00 CX1 2 5太陽能電池 2 6電源開關 2 7無線電接收器 3無線電發射器 4魔鬼粘 5交通錐Page 9 M283268 Simple description of the drawings [Simple illustration of the drawings] Figure 1 is a perspective view of a conventional warning device. Figure 2 is a perspective view of a preferred embodiment of the present invention. Figure 3 is a rear perspective view of Figure 2. FIG. 4 is a perspective view of another preferred embodiment of the present invention. Figure 5 is a rear perspective view of Figure 4; FIG. 6 is a circuit block diagram of the embodiment in FIG. 4. FIG. 7 is a perspective view of another preferred embodiment of the present invention. Figure 8 is a schematic diagram of the use of Figure VII. Say! # The symbol element wants the main light to show the warning Yangtai 2 Turn off the body seat and move the light to turn on the machine IX 00 1 ± 00 IX 1 ± The warning board lights can be D wire line E E power too L 2 4 2 4 rH TH 00 CX1 2 5 solar battery 2 6 power switch 2 7 radio receiver 3 radio transmitter 4 devil stick 5 traffic cone
第10頁Page 10